Perforated Metal - Exhaust Muffler, Filter, Sieve

  • 8" wide louvers in 16 gauge is made of mild steel.
  • Perforated aluminum tubes 11.5 inches in diameter by 48 inches for sorting oyster seed.
  • Stainless steel perforated tube for exhaust muffler, tube size: 2.75" diameter × 3' long, with 3.5" flanges on the end.
  • Aluminum perforated panels to use as door inserts for cabinets, panel size: 15.875 × 29.5625 inches.
  • Round and hexagonal perforated metal sheet is used in bake oven up to 125 degree C with wide open area.
A blue three-peak windbreak panel with round and slotted holes is placed on the floor.
Perforated metal is used as windbreak panel.
  • Stainless steel perforated sheet.
    • Material: SS304.
    • Size of sheet: 1 × 2 m.
    • Thickness: 2 mm.
    • Hole size: 10 mm.
    • Pitch: 16 mm.
    • Hole type: staggered 600.
  • Stainless steel 316 round sieve cylinder.
    • Mesh counts: 600 mesh.
    • Hole diameter: 1 mm, 2 mm, 8 mm and 10 mm.
    • Hole spacing: 260 mm.
    • Thickness of plate: 2 mm.
    • Width: 138 mm.
  • Perforated metal - acoustic pattern.
    • Thick: 0.6 mm.
    • open area: 11%.
    • Hole diameter: 2.41 mm.
    • Coil size: 1.2 m width × 1.8 m length.
  • Perforated metal - acoustic pattern.
    • Thick: 1.6 mm.
    • open area: 30.66%.
    • Hole diameter: 3.25 mm.
    • Hole type: staggered.
  • Perforated metal - acoustic pattern.
    • Material: stainless steel 304.
    • Thick: 1.5 mm.
    • Open area: 30.66%.
    • Hole diameter: 3.25 mm.
    • Hole type: staggered.
  • Helicopter signal plates to be used for labeling power towers.
    • Material: aluminum.
    • Thick: 2 mm.
    • Dimensions: 800 × 560 mm.
    • Surface color: black color.
    • Additional information: plates must be bent at the top and bottom so that two plates can be attached to each other to make a triangle-like shape.
  • Perforated sheet as office trash cans.
    • Hole shape: rectangular.
    • Sheet size: 16" wide × 1 foot.
    • Additional information: 1" non perforated edge.
  • SS304L perforated sheet for nuclear use.
    • Dimensions: 36" × 48".
    • Sheet thickness: 26 GA.
    • Hole type: staggered.
    • Hole size: 0.033” hole with 0.055” spacing.
  • 24" perforated square sheet for a project.
    • Sheet thickness: 16 gauge.
    • Hole type: perforated straight line pattern.
    • Hole diameter: 3/32".
    • Hole distance: 1/4".
  • Stainless steel mesh used for filter.
    • Wire diameter: 0.36 mm × 0.25 mm.
    • Weaving pattern: plain dutch weave.
    • Wire mesh for filtering liquid sulfur
    • Material: AISI 316L.
    • Mesh counts: 24 or 110 mesh.
    • Sheet size: width 820 mm, 1000 mm, 1050 mm.
    • Sheet length: 20 - 25 m.
  • Perforated sheet - SS316 for scrubber.
    • Hole type: staggered round hole.
    • Hole diameter: 1 mm.
    • Hole pitch: 12 mm.
    • Sheet thickness: 3 mm.
    • Sheet size: 1275 mm × 1275 mm.
    • Margin: on all sides 57.5 mm.
  • Fine sieve bonded - SS316.
    • Sieve shape: ring.
    • Wire diameter: 26 gauge.
    • Mesh thickness: 2 mm including upper mesh thickness 0.45 mm and lower mesh thickness 1.55 mm.
    • Mesh counts per inch: 18 mesh upper and 300 mesh lower.
    • Sieve outside diameter: 176 mm including 10 mm edge.
    • Sieve inside diameter: 86 mm including 10 mm edge.
  • Fine sieve bonded - SS316.
    • Sieve shape: ring.
    • Wire diameter: 26 gauge.
    • Mesh thickness: 2 mm including upper mesh thickness 0.45 mm and lower mesh thickness 1.55 mm.
    • Mesh counts per inch: 18 mesh upper and 300 mesh lower.
    • Sieve outside diameter: 190 mm including 14 mm edge.
    • Sieve inside diameter: 111 mm including 14 mm edge.
  • Fine sieve bonded - SS316.
    • Sieve shape: round.
    • Wire diameter: 26 gauge.
    • Mesh thickness: 1.2 mm including upper mesh thickness 0.45 mm and lower mesh thickness 0.75 mm.
    • Mesh counts per inch: 18 mesh upper and 300 mesh lower.
    • Sieve outside diameter: 135 mm.
  • Perforated sheet as cricket shell.
    • Material: AISI 316L.
    • Thickness: 1 mm.
    • Hole type: 60 degree staggered round hole.
    • Hole diameter: 5 mm.
    • Hole pitch: 8 mm.
    • Sheet size: 104 mm × 1000 mm.
  • Perforated sheet as cricket shell.
    • Material: AISI 316L.
    • Thickness: 1 mm.
    • Hole type: 60 degree staggered round hole.
    • Hole diameter: 5 mm.
    • Hole pitch: 8 mm.
    • Sheet size: 104 mm × 1000 mm or 104 mm × 1500 mm.
  • Perforated tube as electronic drum.
    • Tube size: 2" height × 10"/12"/13"/14" tube diameter.
    • Hole pattern: round hole in straight arrangement.
    • Hole size: 1/4".
    • Margin size: 3/4" top margin and 5/16" bottom margin.
  • Aluminum plate for fish drying factory.
    • Thickness: 1.5 mm.
    • Hole pattern: staggered round hole.
    • Hole diameter: 22 mm.
    • Hole pitch: 44 mm.
    • Plate size: 1 m × 1 m.
  • Perforated sheet as cricket shell.
    • Material: AISI 304L.
    • Thickness: 1 mm.
    • Hole type: 60 degree staggered round hole.
    • Hole diameter: 5 mm.
    • Hole pitch: 8 mm.
    • Sheet size: 163 mm × 2493 mm.
  • Perforated basket filter with handle.
    • Basket high: 12".
    • Basket wide: 6".
    • Basket length: 1.8" or 24".
  • Stainless steel for shins.
    • Material: SS 304.
    • Thickness: 0.1 mm.
    • Width: 60 cm.
    • Length: 6 m.
  • Stainless steel for shins.
    • Material: SS 304.
    • Thickness: 0.2 mm.
    • Width: 60 cm.
    • Length: 6 m.
  • Stainless steel for shins.
    • Material: SS 304.
    • Thickness: 0.3 mm.
    • Width: 60 cm.
    • Length: 6 m.
  • Stainless steel for shins.
    • Material: SS 304.
    • Thickness: 0.4 mm.
    • Width: 60 cm.
    • Length: 6 m.
  • Stainless steel for shins.
    • Material: SS 304.
    • Thickness: 0.5 mm.
    • Width: 60 cm.
    • Length: 6 m.
  • Stainless steel for shins.
    • Material: SS 304.
    • Thickness: 1.0 mm.
    • Width: 60 cm.
    • Length: 6 m.
Two black oven grilles with uniform perforated round holes.
Perforated metal for oven grilles.
Two stainless steel sieve with perforated square holes in the bottom.Metal sieve with perforated square holes.
Cabinet screen with metal handles is made of perforated metal mesh.
Cabinet screen is made of round hole perforated metal.
Two round hole perforated filter and a woven wire mesh filter.Filter element is made of round or oval hole perforated metal.
A chair and a garbage can are made of green or white painting perforated sheet metal.
Perforated sheet is used as chair or garbage can.
Three artistic people made of perforated sheet metal are running.Perforated sheet metal can be used for art object.

Inquiry for our product

When you contact us, please provide your detail requirements.
That will help us give you a valid quotation.